3D Printer & 3D Scanner Supplier Malaysia - Trinity3ds

3DxTech Dedicated Page

Materials | Plastic

Chemical Resist

ABS

Firewire® ABS-FR

Premium UL94 V-0 rated ABS & Thermal 95°C
Info
3DXSTAT™ ESD ABS

ABS base, 10^7 to 10^9 Ohm, thermal 95°C, smooth surface
Info
CarbonX™ ABS+CF

ease of printing, stiffness, stability & good surface
Info
FibreX™ ABS+GF10

premium ABS with glass fiber 10

Info

BioCompatible

Medical PEEK

Industrial FDM FIlament

CreatBot medical grade PEEK filament are authenticated by FDA, USP, ISO, etc, which has good biocompatibility, wear resistance and stable chemical
Info

BioDegradable

SimuBone™ Bone Model

latest technology in anatomical bone modeling materials
Info
ECOMAX® Tough PLA

Multi Color, Base on polyester, similar to PLA but durable & stronger
Info

Chemical Resistance

HyperLite™ PP

lower shrink & warp compared to other PP-based 3D filament
Info
MAX-G™ PETG

Durable material, Chemical resistance

Info
3DXSTAT™ ESD PETG

PETG - ESD, chemical resistance, 10^7 to 10^9 Ohm
Info
CarbonX™ PA6+CF

Superior thermal, mechanical & chemical resist, ease of printing
Info
ThermaX™ PEI 1010

Ultem 1010, excellent mechanical, thermal & chemical resist
Info
ThermaX™ PPE-PS

high heat, good chemical resist, non-halogen flame-retard UL94 V0
Info
FluorX™ PVDF

chemical resist, high-heat, & superior abrasion resist

Info
ThermaX™ PSU

[Polysulfone] higher strength & stiffness than Ultem 9085
Info
ThermaX™ PPS

Polyphenylene Sulfide, chemical resist, superior mechanical & thermal 200°C
Info
ThermaX™ PEKK-C

High Thermal and chemical resistance, FST rating
Info

Composite

CarbonX™ ABS+CF

ease of printing stiffness, dimension stable & good surface finish

Info
FibreX™ PP+GF30

High strength, stiffness & impact resistance, chemical resistance

Info
FibreX™ Nylon+GF30

Engineering-grade, good mechanical & thermal properties [HDT of 170°C]
Info
CarbonX™ PA6+CF

higher HDT than our previous grades (147°C at .45MPa) good for higher-temp applications.
Info
FibreX™ PEEK+GF20

HDT of 310°C, exceptional mechanical & chemical resistant
info
CarbonX™ Carbon Fiber PEKK-C

extreme applications where thermal, mechanical & chemical resist required.
Info
FibreX™ ABS+GF10

premium ABS with additional special glass fiber 10

Info
CarbonX™ PEI+CF

superior thermal, chemical & excellent dimensional stability.

Info

ESD (Anti-Static)

3DXSTAT™ ESD ABS

ABS ESD, thermal stability up to 95°C, 10^7 to 10^9 Ohm

Info
3DXSTAT™ ESD PLA

PLA ESD, low warping, 10^7 to 10^9 Ohm

Info
3DXSTAT™ ESD-Flex TPU 95A

ESD elastomer, excellent flexibility, chemical resistance, 10^7 to 10^9 Ohm
Info
3DXSTAT™ ESD PC

Polycarbonate, Impact Resistance, Tg of 147°C, 10^7 to 10^9 Ohm

Info
3DXSTAT™ ESD-Safe PEKK-A

PEKK, HDT of 150°C, Inherent Flame Resist, Chemical resist, Retention of impact
Info
3DXSTAT™ ESD PEI

Ultra polymer that combines excellent mechanical, thermal & resist chemical

Info
3DXSTAT™ ESD-Safe PPS

Chemically resistant , PPS is insoluble in any solvent under 200°C.
Info

Flame Retardant

Firewire® ABS-FR

FR-ABS , premium ABS UL94 V-0 rated, thermal properties 95°C
Info
ThermaX™ PEI 1010

High performance, excellent mechanical, TG 217°C & resist chemical
Info
ThermaX™ PEI 9085

ULTEM™ 9085, FAA-approved FST (FAR 25.853 & OSU 65/65 standards
Info
ThermaX™ PPE-PS

high heat, resist chemical, non-halogen flame-retardant UL94 V0
Info
Firewire® FR PC-ABS

Premium PCABS, UL94 V-0 rated, Thermal 110°C
Info

High Temperature

ThermaX™ PPS

excellent chemical resistance, superior mechanical & thermal 200°C
Info
CarbonX™ HTN+CF

High Temp Nylon [HDT of 240°C], low moisture, resist high mechanical load
Info
FibreX™ PEEK+GF20

[HDT] of 310°C mechanical & chemical resistance
Info
ThermaX™ PEKK-C

Exceptionally good mechanical, thermal (335°C), resist chemical
Info
ThermaX™ PPSU

HDT of 205°C, resist stress crack, impact, inherent flame retardant
Info
FluorX™ PVDF

Resist chemical, high-heat (Tg of 162°C) Resist abrasion, radiation
Info
ThermaX™ PES

HDT (228°C), resist Crack (ESCR) & tougher than Ultem™ 1010
Info
3DXSTAT™ ESD PEI

ultra polymer, excellent mechanical, thermal & resist chemical
Info
3DXSTAT™ ESD PEKK-A

High thermal Tg of 162°C, HDT of 150°C & Tm of 305°C
Info

Medical

SimuBone™ Bone Modeling

SimuBone™ Bone Modeling Filament is the latest technology in anatomical bone modeling materials
Info

Nylon

CarbonX™ PA12+CF

Low shrinkage, strength, stiffness, HDT 150°C

Info
AmideX™ Nylon 6-66

high tensile strength, wear resistant, chemical resistant
Info
CarbonX™ PA6+CF

High tensile & rigidity, wear & chemical resistance,

Info
CarbonX™ HTN+CF

HDT of 240°C,, Low moisture, outstanding chemical resistance
Info
FibreX™ Nylon+GF30

Strong layer bonding, thermal [HDT of 170°C]
Info

PC (Polycarbonate)

ezPC™

Polycarbonate created for ease of printing on the widest array of 3D printers.
Info
Firewire® Flame Retardant PC-ABS

ABS - premium UL94 V-0 rated ABS & Thermal 110°C
Info
CarbonX™ PC-ABS+CF

high heat, high stiffness, excellent surface quality, and dimensional stability
Info
3DXSTAT™ ESD PC

Polycarbonate - ESD High thermal properties including a Tg of 147°C

Info

PP (Polypropylene)

FibreX™ PP+GF30

Strength, stiffness, impact, dimensional stability, chemical resistance & high thermal
Info
CarbonX™ PP+CF

ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish
Info
HyperLite™ PP

lower shrink & warp compared to other PP-based 3D filament

Info

TPU / TPE

3DXFLEX™ TPE (thermoplastic elastomer)

excellent durability, resilience, energy return, and fatigue resistance.
Learn More
3DXSTAT™ ESD-Safe TPC (90A Flex)

Elastomer, ease of printing, resist chemical & toughness.
Learn More

Support Material

AquaTek™ X1 Advanced USM

Soluble Support compatible with variety materials PLA, ABS, NYLON, Carbon Fiber, Glass Fiber, and more
Info
ThermaX™ HTS High-Temp

Break away support for printing high-temperature polymers PSU, PES, PPSU, PPS, Ultem™ PEI, PEKK & PEEK.
Info

Adhesive

Magigoo Pro Kit

From PLA to PEEK – Magigoo has an adhesive that will assist you in printing excellent parts.
Info
Nano Polymer

1 Adhesive for all material from PLA to PEEK

Info

Industry

Application

Products

Contact info

TRINITY 3D SOLUTIONS (M) SDN BHD

218, Block A, Kelana Centre Point,

Jalan SS 7/19, 47301 Petaling Jaya,

Selangor, Malaysia

T : +60327764814

E : marketing@trinity3ds.com

Make An Appointment

Designed by Trinity42

Share by: