Left Hotend 260°C design to print  PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. Right Hotend 420°C  is made of martensite steel, which is able to print high performance materials. 

Advanced extruder feeding system support high-speed printing (200mm/s) and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.

High Accuracy & speed: closed-loop control of position, speed and torque; overcome the problem of lossing step. No layer shift. Stability: timeliness, fast response, no inertia, no delay. 

Full enclosed chamber can reduce noises, at the same time to provide constant temperature, so that the model won't deform. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.

The accurate linear rail structure can print models in accuracy high reach to 4~5 times higher than the other ordinary optical axis printers in mass market. 

Hot air chamber can provide constant room temperature so that model won’t deform when printing.（D600 Pro available only）

The printer has a 4.3" touch screen, more easy to operate. We also provide One-Key to preheat, print, home as well as other shortcut keys.

The function is able to dry Nylon,PC,ABS, which with high water absorption, 45°C and 65°C chamber（D600 Pro  only）

The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

The printer will automatically memorize the current position and save print data when power cut off or stop when filament run out. 

The printer has vertical thermal conductivity so that can support high thermal efficiency. Able to set the parameters to turn off the hot bed automatically after certain layers.

Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.（D600 Pro available only）by BL-Touch probe.